Emos E5010, Manual

Page: 7 / 84

7
Weather Forecast
The station uses changes in atmospheric pressure to forecast weather for the next 12–24 hours for
an area within the range of 15–20 km.
The accuracy of weather forecast is 70–75 %. The forecast icon is displayed in field no. 16.
As the weather forecast may not be 100 % accurate, neither the manufacturer nor the seller can be
held responsible for any loss caused by an incorrect forecast.
When you first set or reset the weather station, it takes approximately 12 hours before the weather
station begins forecasting correctly.
Weather Forecast Icons
Sunny Cloudy Overcast Rain Heavy rain
the snowflake icon will flash at outdoor temperature between -3 °C to +1 °C.
the snowflake icon will remain on the screen at outdoor temperature below -3 °C.
Comfort Level Indicator – Smiley
The comfort level indicator is displayed in field no. 9.
If humidity is between 40–70 % RH and temperature is between 20–28 °C, the screen will show the
COMFORT icon.
If humidity is lower than 40 % RH, the screen will show the DRY icon.
If humidity is higher than 70 % RH, the screen will show the WET icon.
If temperature is not between 20–28 °C and humidity is not between 40–70 % RH, no icon will be
displayed.
Setting Temperature Limits for Maximum and Minimum Temperature
Temperature limits can be set independently for up to 3 outdoor temperature sensors.
Long press the ALERT button. The value for setting a maximum temperature alert will begin flashing.
Use the UP and DOWN buttons to set the desired temperature between -49 °C and 70 °C.
Holding the buttons speeds up the value adjustment.
Then press the ALERT button and set the minimum temperature alert between -50 °C and 69 °C.
Press the ALERT button to activate/deactivate the temperature alert function. will be displayed.
Temperature limit range is -50 °C to +70 °C, with 1 °C resolution.
When the set temperature limit is exceeded, an audio alarm will sound 5× and the value will begin
flashing.
Pressing the ALERT button silences the audio signal and the value will stop flashing.
Battery Replacement Warning
Replace the batteries in the station or the sensor once the display of the station or the sensor shows
the low battery icon .
Upkeep and Maintenance
The product is designed to serve reliably for many years if used properly. Here are some tips for
proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and humidity and sudden changes
in temperature. This would reduce accuracy of detection. Do not place the product in locations
prone to vibration and shocks – may cause damage.
• Do not subject the product to excessive force, impacts, dust, high temperatures or humidity –
doing so may cause malfunction, shorten battery life, damage batteries and deform plastic parts.
• Do not expose the product to rain or moisture if it is not designed for outdoor use.