3
Emos spol s.r.o. declares that products P28BS, P28BT, P28BR are in
compliance with the essential requirements and other applicable
provisions of directives. The devices can be freely operated in the EU.
The Declaration of Conformity can be found at
http://www.emos.eu/download.
Contents
Bluetooth speaker
1 pc
AUX audio cable
1 pc
Suspension hook
1 pc
USB cable
1 pc
Instruction manual
1 pc
Device Description
Control Buttons and Indicators
Fig. 1
1 – AUX port
2 – USB charging connector
3 – ON / OFF button
4 – Microphone
5 – Play / Pause
6 – Previous track / Volume
down
7 – Next track / Volume up
8 – Status indicator
9 – Charging indicator
Installation and Assembly
Powered by Batteries
The device contains a built-in 4,400 mAh battery. The Li-Ion 3.7 V battery
is rechargeable and can be charged repeatedly at a voltage of 5 V.
Recharging the Battery
Plug the USB cable into the device’s connector and plug the other end
to a USB interface or into power source with a USB port. Charge time is
approximately 3 hours depending on the status of the battery. While
charging, the red indicator (9) will be glowing. After fully charging, the
red indicator (9) switches to green. If you wish to use a power adapter
for external 5 V DC charging, connect the cable to a microUSB connector.
If you have not been using the device for a longer period of time, the
rechargeable battery might be fully drained and may be in a “non-active”
state. This is typical for all rechargeable batteries. When first recharging
the battery (to “activate” it) we recommend charging for at least 5 hours.
Controls and Functions
Pairing P28 with a Bluetooth Device
• Turn P28 on using the ON/OFF button.
• If the blue indicator (8) is rapidly flashing, P28 is ready for pairing.
• Activate the Bluetooth function in your device and check that
visibility for nearby devices is enabled. Choose the function for
searching for nearby devices.
Summary of Contents for E0082
Page 47: ...47 ...
