5
/
18
Charging the Bike (Lead Acid Battery)
There are two different plugs on your charger: one end that goes into an 110V power outlet,
and the other into the charger port.
1.
Take one end of the charger and plug it into the charger port located on the bike (Please
make sure that it is fully plugged in)
2.
Plug the other end of the charger into the power outlet.
3.
Confirm that the charging indicator turns red.
Note: When the battery is fully charged, the charging indicator will turn green.
4.
Unplug the charger from the power outlet.
5.
Unplug the charger from the battery/bike.
Note: The charger light must be red when both plugs are plugged in. It will always turn red first
if the bike has been used. It will turn green after it is fully charged.
Best practices
Charge as needed, it is not necessary to charge the battery from 0 power. Plug the charger into the
wall first and then the unit
Do not leave the charger charging after it is fully charged. If you see the charge is green unplug it.
It is recommended to get an outlet timer and set it for the recommended charging hours, so that as
soon it is done charging the timer will cut out the power completely.
WARNING!
Charge the bike for no more than 12 hours.
Fully charge the bike once a month during long periods of inactivity. (i.e. during the
wintertime)
