6
ASSEMBLY
INSTRUCTIONS
For
Front
W
heel
CAUTION: Your Electric bike is equipped with a front disk brake. Be careful not to
damage the disk, caliper or brake pads when installing the front wheel. Never apply
the lever unless the disk is correctly inserted in the caliper.
Your bicycle may be equipped with a different securing method for the front wheel
(1)
With the steering fork facing forward, insert the wheel between the fork blades so
that the axle sits firmly at the top of the fork dropouts. The cam lever should be on
rider
’
s left side of the bicycle (fig. 4-1)
(2)
Make the front wheel axle sits completely in the slots of the fork dropouts, and at
the same time centering the wheel rim in the fork:
With a cam action system, move the cam lever upwards and swing it into the CLOSED
position (fig. 4-1). The lever should now be parallel to the fork blade and curved
toward the wheel. To apply enough clamping force, you will need to wrap your
fingers around the fork blade for leverage, and the lever should leave a clear imprint
in the palm of your hand.
NOTE:
If,
on
a
traditional
cam
action
system,
the
lever
cannot
be
pushed
all
the
way
to
a
position
parallel
to
the
fork
blade,
return
the
lever
to
the
OPEN
position.
Then
turn
the
tension
adjusting
nut
counterclockwise
for
one
quarter
turn
and
try
tightening
the
lever
again.
WARNING:
Securely clamping the wheel with a cam action retention device takes
considerable force. If you can fully close the cam lever without wrapping your fingers
around the fork blade for leverage, the lever does not leave a clear imprint in the
palm of your hand, and the serrations on the wheel fastener do not emboss the
surfaces of the dropouts, the tension is insufficient. Open the lever; turn the tension
adjusting nut clockwise for a quarter turn; then try again.
Spin the wheel to make sure that it is centered in the frame and clears the brake pads;
then squeeze the brake lever and make sure that the brakes are operating properly.
(3)
Hex nuts or hex key bolts which are threaded on to or into the hub axle. (bolt-on
wheel, fig. 4-4 )
Summary of Contents for E-mini B
Page 1: ...www emmo ca...
