SUPERIOR DENTAL HYGIENE
14
Onlineshop: emmi-dent.com
Using the emmi®-dent Platinum with 100%
Original emmi®-dent Ultrasound.
After switching on the unit you will feel a soft vibration and hear
a gentle sound. The actual cleansing process is not affected by
this. You cannot see, hear or feel Ultrasound, and thus a small
motor is integrated within the hand piece, so that the user can
feel and hear that the device is switched on and ready for opera-
tion. Also, a low peep sound is emitted every 6 seconds and the
motor stops briefly to show you that the device is functioning.
(Beep can be switched off manually).
Daily use
For your dental hygiene, we recommend you to clean your
teeth with the 100% Original Ultrasound of your emmi®-dent
Platinum twice a day for approx. 3 min.
1.
Moisten the bristles of the Ultrasound brush shortly under
running water.
2.
Apply a double pea-sized quantity of emmi®-dent Ultrasound
Toothpaste on the bristles of your Ultrasound brush head.
Only the emmi®-dent Ultrasound Toothpaste guarantees the
Original 100% emmi®-dent Ultrasound function. For more
details on the emmi®-dent Ultrasound Toothpaste, please
read under the separate section, emmi®-dent Ultrasound
Toothpaste“ in this user manual.
3.
Switch on the device and bray the Ultrasound Toothpaste
uniformously on the inside and outside surfaces as well as on
the chewing sides of your teeth.
4.
The bristles of the Ultrasound brush head embrace 2 – 3 teeth,
according to the size of your teeth. Maintain the bristles gent-
ly and without pressure motionless on the inside, outside and
on top (chewing sides) of the teeth for approx. 6 seconds each
time. The actual duration depends on the amount of impuri-
ties on the teeth (plaque, nicotine, wine stains, etc.). In case of
acute problems, such as gingivitis or parodontitis, leave the
bristles for approx. 15 to 20 seconds on the affected sites. This
will result in a quicker and better healing. A longer application
does not harm your teeth, because the emmi®-dent Platinum
implements a gentle Ultrasound. When you have finished
your dental hygiene, move the bristles various times over your
teeth, in order to remove any further adherences or impuri-
ties. Then rinse your mouth with water or an oral rinse.
5.
After cleansing, wash the bristles and hand-piece under
running water. Switch off the device and dry the hand piece.
Please note that the bristles are free and clean from foodstuff
or other impurities. Now you can place the device with the
integrated Ultrasound brush head back on the charging dock.
