emmeti 07917515, Installation And Use Manual, Page: 22 / 36

GB
22
1.8
Clock Setting
At first using , the current time must be set.
Switching on the air conditioner both symbols flash:
Press to set the day of the week and the
current time
Once set day and current time stops
flashing.
Clock
Day of the Week
Indicator
Time correction
With the air conditioner in the complete shutdown
state, keeping the "TIMER / CLOCK" button pressed
for 3 seconds, enter the current time. Each time
the "TIMER / CLOCK" button is pressed, the display
flashes in the following sequence:
9
DAY HOUR MINUTE
9
DAY HOUR MINUTE
The first day of the week flashes on the indicator,
pressing
each pressure advan-
ces the day 1 to 7; when the indicator reaches the
desired day, press the "ENTER" button to confirm.
Flash hours
9
DAY HOUR MINUTE
press
To set exact hour.
Flash minutes, to set them proceed as per the hour
and press enter to confirm.
After making the appropriate settings, the buzzer
emits 4 beeps to confirm that the time has been
changed.
1. The time correction must be set with the appliance
in the complete shutdown state.
2. Complete shutdown: with the appliance switched
on keep the "ON / OFF" button pressed for 3 seconds.
Switching off: with the appliance switched on, press
the "ON / OFF" button once to switch to the off state.