1
3
2
4
5
28
Manual City Jet & City Bassinet v. 1.1
• Attach the hood to the pram body by pushing the plastic leg of the
hood into the plastic holders on the pram body. Make sure they
snap into place.
• Press the hood fabric onto the plastic holder, on each side. Press the
velcro onto the pram body.
• The press studs on the back of the hood is to use when roll up the
hood for better ventilation when it is hot.
• Pres the apron onto the hood and anto the plastic holder on each
side.
IMPORTANT
• The hood cannot unfold when the apron is snapped onto the hood
without releasing the press studs.
Assembly of City Bassinet
This section applies to the following products:
City Bassinet
Assembly of pram body
• Remove plastic covers from mattress, fabrics and discard. Slide the
two metal support brackets onto the base of the pram body.
• The base is made of wood.
WARNING
• Risk of suffocation. Do not let your children play with the plastic
bag.
• Make sure that the metal support bars are attached so that the pram
stability and safety will not be jeopardised.
• Insert the mattress.
WARNING
• The depth from the top of the mattress together with other bed ac-
cessories to the carry-cot upper part must be at least 150 mm.
• Do not add a mattress thicker than 25 mm.
