8
9
1
2
1
Manual City Jet & City Bassinet v. 1.1
25
5
6
7
English
Assembly of seat unit
This section applies to the following products:
City Jet
Assembly of front bar
•
Affix the front bar by pulling down the insert part of the front bar in
the armrest’s holder.
• Press stud the crotch strap around the frontbar of stroller.
WARNING!
• Check that the front bar is in place and locked into position when
the child is in the vehicle.
• The hood is attached by pressing the presstuds as shown on the
picture.
WARNING
• Always check that the backrest is securely fastened in position
before use. This step is very IMPORTANT!
Removal of the front bar
• The front bar is removed by pressing both plastic legs, one on each
side and pull up the frontbar.
Assembly of Apron (Accessory)
• Slip the apron over the footrest and pull toward the front of the
hood. Snap the boot onto the four press-studs, two on each side of
the hood.
IMPORTANT
• The hood can not be folded with the apron attached.
Use of the rain cover
• The rain cover is attached by placing the rain cover over the carry-
cot and seat-unit. Please note that there is an opening in the rain-
cover near the hood opening. Use the rain cover that is supplied
with the pram.
• Always use the rain cover when it’s raining or snowing. If the pram
is damp before the rain cover is attached, wipe off the fabrics first if
possible.
• Make sure the raincover is completely dry before it is placed back
into its bag.
