Safety Instructions
Prior to Installing you new EMM Labs product please read the following safety
instructions:
• Read and follow all instructions.
• Keep these instructions.
• Do not use or install product near any sources of water, rain and/or moisture.
• Clean using only a dry lint free or micro fibre cloth.
• Install only in accordance with the manufacturer’s instructions.
• Refer all servicing to approved service personnel.
• Do not install near any heat sources such as radiators, heat registers,
stoves, open flames or other apparatus that produce heat.
• Do not install product outdoors or in direct sunlight.
• Leave at least 30cm or 12 inches around product to ensure proper ventilation.
• Do not cover/block ventilation openings.
• Do not place product near strong electrical or magnetic radiation/emissions.
• Terminals marked with this symbol should be considered hazardous
and live. Proper percautions should be taken when wiring these terminals.
This EMM Labs product must be connected to a mains socket outlet with a protective
earthing connection (grounding pin).
WARNING
: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO WATER OR MOISTURE.
EEC
: This product has been designed and tested to comply with the
limits set out in EN55013, EN55020 and EN 60065:2009 (electrical safety)
Safety Instructions
004
MTRX2 AMPLIFIER OWNER’S MANUAL
© 2017 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
