39
Output Run Type
Output Normally non-energised
Output Normally energised
Output Pulse Time
Direction of Counting
Upcount. ( 0 --> Preset )
Downcount. ( Preset --> 0 )
Data Record
Count value is saved to memory when power is
disconnected and restored on power up.
Count value is not saved to memory when power is
disconnected. When power up is shown on the
screen.
Sensor Type Selection
NPN type sensor selected
PNP type sensor selected
Reset and Set Protection (for Front Panel Access)
Only RESET Button protection is active.
Actual value can not be reset by Reset button.
SET value can not be changed.
Full protection ; Reset protection is active and SET value can
not be changed.
There is no Reset and Set protection
It determines how long Output will be active.
It can be adjusted from 00.00.00 to 99.59.99 (99 minutes; 59.99 seconds).
For details, refer to the section where output functions are
defined
