During installation into a metal panel, care should be taken to avoid injury from
metal burrs which might be present. The equipment can loosen from vibration
and become dislodged if installation parts are not properly tightened. These
precautions for the safety of the person who does the panel mounting.
2.5 Panel Mounting
c
11
Operating Temperature
:
Max. Operating Humidity :
Altitude
:
0 to 50 °C
90
Rh (non-condensing)
Up to 2000m.
%
Operating Conditions
Forbidden Conditions:
Corrosive atmosphere
Explosive atmosphere
Home applications (The unit is only for industrial applications)
2.4 Environmental Ratings
c
1-Before mounting the device in
your panel, make sure that the cut-
out is of the right size.
2-Check front panel gasket
position
3-Insert the device through the
cut-out. If the mounting clamps are
on the unit, put out them before
inserting the unit to the panel.
1
2
3