ENGLISH
All order information of ESM-3721HT Hatcher Controller are given on the table at above. User may
form appropriate device configuration from information and codes that at the table and convert it to the
ordering codes.Firstly, supply voltage then other specifications must be determined. Please fill the order
code blanks according to your needs. Please contact us, if your needs are out of the standards.
10. Other Informations
16
V
Ş
Vac,
Z
Ş
Vdc
Ş
Vdc or Vac can be applied
W
Your Technology Partner
www.emkoelektronik.com.tr
Thank you very much for your preference to
use Emko Elektronik products, please visit our
web page to download detailed user manual.
A BC D
E
FG HI
/
/
U
V
W
Z
/
/
1
0
0
Power Supply Voltage
A
ESM-
3721
(77x35 DIN Size)
4
115V
( %15) 50/60Hz - 1.5VA
V
±
5
230V
( %15) 50/60Hz - 1.5VA
V
±
8
10 - 30 V
Z
- 1.5W
0
01
01
3
24
V
( %15) 50/60Hz - 1.5VA
V
±
2
24
V
( %15) 50/60Hz - 1.5VA
W
±
Alarm or Humidifier Output
FG
Input Type
BC
Scale(°C)
0°C/32°F ; 100°C/212°F
09
Egg Tray Rotator Output
HI
1
Relay Output ( 5 A@250 V
V
at Resistive Load,1NC ,1 NO )
(Electrical Life : 100.000 operation (Full Load))
Heating Output
E
2
SSR Driver Output ( Maximum 30mA, Maximum 15V )
PT 100, IEC751(ITS90
)
01
Relay Output ( 3 A@250 V
V
at Resistive Load , 1 NO )
(Electrical Life : 100.000 operation (Full Load))
01
Relay Output ( 3 A@250 V
V
at Resistive Load , 1 NO )
(Electrical Life : 100.000 operation (Full Load))
c
Before commissioning the device, parameters must be set in accordance with desired use.
Incomplete or incorrect configuration can cause dangerous stiuations.
c
Because of limited mechanical life of relay output contact,
SSR output is recommended which the device use PID control algoritm.
The device with ON/OFF control algoritm, hysteresis parameter must be set a suitable value
for your system, to avoid too much relay switching.
c
0°C/32°F ; 100°C/212°F
12
PTC (Note-1)
Temp.Sensor which is given with ESM-
3721
V
0
None
1
PTC-M6L40.K1.5 (PTC Air Probe with 1.5 mt silicon cable)
2
PTCS-M6L30.K1.5.1/8” (PTC Liquid Probe 1.5 mt silicon cable)
Note-1:If input type is selected PTC (BC= 12), Temperature sensor is given with the device. For
this reason, if input type is selected as PTC,sensor type (V = 0,1 or 2) must be declared in
ordering information.