EMKO EDA-3700, Instruction Manual

Page: 3 / 4

9 10
12 11
A
-A
0
T/2 T 3T/2 2T
DC AC
AC/DC(rms)
3
1
A
3
1
A
0.000
A
-A
0
T/2 T 3T/2 2T
A A 0.000
A
0
T/2 T 3T/2 2T
2
1
A
2
1
A
2
1
A
A
0
d d
T 2T
T
d
A
A T
d
T
d
-
2
2
T
d
A
0
A
-A
T/2 T 3T/2 2T
2
1
A
2
1
A
0.000
0
A
T/2 T 3T/2 2T
2
1
A
π
2
A 0.308A
0
A
T/2
T
3T/2
2
1
A 0.386A π
1
A
Input
cUH
cUH - HSU
cUL + HSL
cUL
dLU
dLL
dLL dLU
Low Limit Alarm On Delay Time Parameter
1
Low Limit Alarm On Delay Time Parameter
1
Alarm Set Value Low Limit Parameter
Alarm Set Value Up Limit Parameter
Press enter button for saving the
parameter.
Press increment button for accessing to the
next parameter, press decrement button for
accessing to the previous parameter
When PROG button is pressed for 5
seconds, “P” led starts to blink. If
programming mode entering
password is different from 0,
programming mode entering screen
will be observed.
Change the value with increment
and decrement buttons.
Press enter button for accessing to the parameter
value. Press increment button for accessing to the
next parameter, press decrement button for
accessing to the previous parameter.
Press ENTER button for
accessing to the
password entering
screen.
Enter programming mode accessing password
with increment and decrement buttons.
If programming mode accessing password is 0,only three parameters
area ccessible,and the parameter values can be changed.
Press ENTER button for
entering the password.
If no operation is performed in programming mode for 20 seconds, device turns to main
i
ioperation screen automatically..
EDA­3700
EDA­3700
EDA­3700 EDA­3700
EDA­3700 EDA­3700
EDA­3700 EDA­3700
Note1: If programming
mode accessing password
is 0, Current conversion
ratio parameter is
observed instead of
programming screen
EDA­3700
AC DC
EDA­3700
AC DC
EDA­3700
AC DC
When the measured current value exceeds the upper scale,
"nnnn" and "9999" are alternately displayed on the screen.
When the measured current value exceeds the subscale,
"uuuu" and "­1999" are alternately displayed on the screen.
When the AC / DC ammeter is energized, firstly the revision number of the software is displayed to
the user.
Software revision number
'' rU " Revision letter