EMKO EDA-3700, Instruction Manual

Page: 1 / 4

2
3 4
:
Emko Elektronik A.S. DOSAB Karanfil Sk.No:6 16369 BURSA/TURKEY
Emko Elektronik Sanayi ve Ticaret A.ª.
Demirtaº Organize Sanayi Bölgesi Karanfil Sk.No:6 16369 BURSA/TURKEY
EDA­3700
A
C
/
D
C
A
m
m
e
te
r
0 to 50 °C
%90 Rh (Yoğunlaşma olmaksızın)
Up to 2000 m.
±
A visual inspection of this product for possible damage occurred during shipment is
recommended before installation. It is your responsibility to ensure that qualified mechanical
and electrical technicians install this product.
If there is danger of serious accident resulting from a failure or defect in this unit, power off
the system and separate the electrical connection of the device from the system.
The unit is normally supplied without a power supply switch or a fuse. Use power switch and
fuse as required.
Be sure to use the rated power supply voltage to protect the unit against damage and to
prevent failure.
Keep the power off until all of the wiring is completed so that electric shock and trouble with
the unit can be prevented.
Never attempt to disassemble, modify or repair this unit. Tampering with the unit may results
in malfunction, electric shock or fire.
Do not use the unit in combustible or explosive gaseous atmospheres.
During putting equipment in hole on the metal panel while mechanical installation some metal
burrs can cause injury on hands, you must be careful.
Montage of the product on a system must be done with it’s fixing clamps. Do not do the
montage of the device with inappropriate fixing clamp. Be sure that device will not fall while
doing the montage.
It is your responsibility if this equipment is used in a manner not specified in this instruction
manual.
Repairs should only be performed by trained and specialized personnel. Cut power to the
device before accessing internal parts.
Do not clean the case with hydrocarbon­based solvents (Petrol, Trichlorethylene etc.). Use of
these solvents can reduce the mechanical reliability of the device. Use a cloth dampened in
ethyl alcohol or water to clean the external plastic case.
EDA­3700
AC DC
AC DC
Phone:+90 224 261 19 00
Fax :+90 224 261 19 12
Phone:+90 224 261 19 00
Fax :+90 224 261 19 12
EMKO Elektronik warrants that the equipment delivered is free from defects in material and
workmanship. This warranty is provided for a period of two years. The warranty period starts
from the delivery date. This warranty is in force if duty and responsibilities which are
determined in warranty document and instruction manual performs by the customer
completely.
V
V
V
±
±
Z
Automatizace a ovládání / Proudová a výkonová relé
uvádí:
EMKO EDA3700
Eshop: www.emareg.cz Email: shop@emareg.cz