12
Appendix B – Using LiteEdit to Load Firmware
LiteEdit is the utility used for updating the firmware on the Satlook Lite. You can
check the installed firmware version using the Info menu which will show the current
version. In order to load firmware, you must have a PC which supports an RS232
connection. The firmware loading must be performed with the external charger
connected. The RS232 cable to be used is supplied as part of the kit with the Satlook
Lite. Most laptops do not have an RS232 connection, but a USB to RS232 adapter
can be purchased at low cost. Connect the Rs232 cable from the computer to the
instrument. You will need to connect the Satlook Lite to the charger as part of the
firmware update process, but do not connect it yet. Run the “LiteEdit” application.
Use the “Update Firmware” menu item to select a COM port. Select the RS232 port
on the computer. Normally, the port is COM1 but some USB to RS232 converters will
use some other port. If desirable, this USB to RS232 conversion device can be
made to always use COM1 by clicking Control Panel / Device Manager / Ports and in
the Advanced settings for the adapter set to COM1.
When the COM port has been selected, LiteEdit will prompt you to remove one
battery and connect the charger cable to begin the download.
Summary of Contents for satlook Lite
Page 1: ...Satlook Lite USER MANUAL ...
