9
4. Channel groups
In this mode You can select the channels to be stored in DIGIAIR
Pro´s memory.
The stored channels are presented in Multi
channel mode.
Set up the five pages with the channels of Your choice. Do like this:
A) The top value in the first bar (most to the left) is flashing when
entering this setup. Step with the “UP”/”DOWN”-buttons to the
channel You want to change.
Press the “MODE”-button to open up the memory position.
- The channel nr will start to flash faster.
- Set the new channel with the “UP”/”DOWN”-buttons.
- Press the “MODE” button and the new channel is locked at this
position (memory saved).
- The channel nr will flash in normal pace.
B) - Chose the next channel to change by highlighting it with the
“UP”/”DOWN” buttons.
- Press the “MODE”-button to open up the memory position.
- The channel nr will start to flash faster.
- Set the new channel with the “UP”/”DOWN”-buttons.
- Press the “MODE” button and the new channel is locked at this
position (memory saved).
- The channel nr will flash in normal pace.
C) - Repeat step B until all wanted channels have been
memorized.
- Press the “OK” button and the complete setting will be stored.
5. Auto power off
Set the meter for automatic switch Off after 1, 5, 10 or 30 minutes.
Or chose to have the meter always On (until manual switch Off).
6. Spec mode
Chose between stepping in the Channel raster (CH) or in the
Frequency raster (MHz).
7. Language
Select the Menu-language of Your choice. Chose between: English,
Portugese, German, Spanish, Polish and Italiano.
8. dB Units
Select the dB-unit of Your choice. Chose between dBuV, dBm and
dBmV.
3.4 Attenuator
Turn On the attenuator with the Ok-button.
