Technical Specification:
PRODUCT NAME
SPG500W
SPG1000W
Rated Power
500W/650VA
1000W/1250VA
INPUT
Selectable Voltage &
Frequency Range
170-250 VAC(For UPS mode) 49-60Hz ± 1%
110-250VAC(For Inverter mode) 49-60Hz ± 1%
OUTPUT
System Output Condition
When the battery is fully charged, System output will be automatically change over
to UPS / INVERTER mode, and resume back to bypass mode only by 11.5 V±0.2 V /
23±0.2V of battery voltage when solar is available
Display
Battery Voltage, Load Level, UPS ON, Mains ON, MPPT ON / Solar ON, Battery Full
AC Voltage Regulation
- 5% 50Hz ± 1%
Protection & Surge Power
Over Load, Over Charge, Phase Reversal, Over Temperature and Surge;
i. Operating safely for at least one minute at 125% of rated power.
ii. Operating safely for at least ten seconds at 150 % of rated power.
iii. Operating safely for at least five second at 200% of rated power.
Efficiency (Peak )
85%
Transfer Time
15 ms (For UPS mode )
40ms ( for Inverter mode )
Waveform
Pure Sine Wave
BATTERY & AC CHARGER
Battery Voltage
12VDC
24VDC
Battery LVD Cut off
10.8 ± 0.2V
21.6V ± 0.2V
Load Reconnection
12.6V ± 0.2V
25.2V ± 0.2V
Maximum Charge Current
2A to 12A Auto programmed
MPPT SOLAR CHARGER
Operating Voltage
18VDC -55VDC
38VDC -66VDC
Maximum PV Array Open
Circuit Voltage
85VDC
Maximum Charging Current 30A
40A
Maximum Efficiency
97%
Standby Power
Consumption
6W
PHYSICAL
Dimension H X W X L (mm )
120 x 280 x 380
Net Weight (kgs )
7.5
Operating temperature
0 C - 55 C
Enclosure Rating
IP20
9