background image

are looking for and press 'Enter'. The 'List' function shows the names of all 
registered competitors. Use the arrow keys to scroll through the list, and the 
'Enter' key to display additional information (start number, tag/e-card number(s) 
of the relevant competitor. The 'Edit' function is used when you want to change 
some of the information entered on a competitor. Use the arrow keys to scroll 
down to the competitor you want to change, and press the 'Enter' key to display 
the competitor's information. When you get to what you want to change (name, 
start number, tag/e-card number), the 'Clear / ON' key is used to delete the 
values entered, and the correct value is entered - in the same way you do when 
you enter to a new competitor. 'Delete' is used when you want to delete a 
competitor, while 'Delete all' deletes all competitors. This menu selection must be
confirmed with 'Enter'. 

4: Information

The information menu is divided into three submenus. Use the arrow keys to 
navigate between the different submenus. 

4.1: General 

General information about eScan2. The first line shows which code eScan2 is set
to. The second line shows how many passes have been registered for the event 
in question. The third line shows the eScan2 serial number. 

4.2: Power 

The current menu shows current information about the batteries in eScan2. The 
first line shows how many volts the battery has. Second line shows the charging 
voltage, while third line shows the level of the battery (10 = fully charged, 1 = 
almost empty battery) 

4.3: Version 

The first line shows which firmware version is running on eScan2. The second 
line shows which version of BLE is used. 

5: Settings 

The settings menu has a number of submenus, which allow the user to change 
the layout of eScan2. Use the arrow keys to scroll through the submenus and 
confirm the desired selection with 'Enter'. 

5.1: Set clock: 

Select this menu option to change the time and / or date. New time (in the format
TT: MM: SS) is entered with the number keys and you acknowledge with the 
'Enter' key when the clock is exactly equal to ¨second equal to the time you have 
tested. New date is entered in the same way (in the format DD / MM / YYYY). 

5.2 ACK:

 

Turn off or 'ack' (acknowledgment) for emiTags. If ack is on, eScan2 confirms 
that the chip has been read, so that the chip does not send the same message 
several times. If 'ack' is off, emiTag sends all messages three times. Default 
choice is that 'ack' is on. 

Summary of Contents for eScan2









Reviews: