EN
Copyright ©2021 EMist, a MasVida Health Company. All rights reserved. All product names, logos, and brands are
property of their respective owners. Prices are in U.S. Dollars. Prices are subject to change. All use of the website
and resources is subject to the Terms of Use. EMI-018-21 Multilingual Manuals - 110321
13
STORAGE
• Insert at least 4 oz of water into the liquid tank.
• Run the sprayer for at least 1-2 minutes to flush active chemicals from
the system.
• Remove batteries and re-charge by placing on the charger.
• Wipe down exterior with water or alcohol to remove dirt and soil.
• Use the battery power indicator to determine the `battery’s state of
charge (3 bars = full charge).
• Remove the tank and battery from the system when not in use.
This keeps the unit from leaking or getting any fluid into the battery
compartment or the contacts.
BATTERY REMOVAL
• Make sure the system is off.
• Remove the battery from the sprayer by grasping the battery pack
firmly, depress the battery pack button down and slide out from the
bottom of the unit.
• Place battery into charger to fully charge for next usage. Each battery
takes approximately 45 minutes to fully charge.
• Store batteries and chargers in a cool, dry place.
MAINTENANCE & CLEANING
Empty fluid or run until empty
CAUTION:
DO NOT STORE THE SPRAYER IN AN AREA
THAT MAY FREEZE (TO AVOID DAMAGE FROM LIQUID
REMAINING IN THE SYSTEM AND LINES). THIS WILL
VOID THE WARRANTY. DO NOT STORE THE UNIT IN
EXTREME HEAT, AS IT DOES HAVE CIRCUIT BOARDS
AND ELECTRICAL COMPONENTS. THIS WILL VOID THE
WARRANTY.
TO PREVENT CROSS CONTAMINATION OF CHEMICALS,
YOU MUST PERFORM A FLUSH ANY TIME YOU CHANGE
THE TYPE OF CHEMICALS BEING USED.