User Manual
www.emiots.com
Page 8 of 13
Usage:
set_client@<serial>%<password>#<client name>#
Example:
set_client@12345%123456#EMIOTS#
Note: Max 10 character limit.
5
SET_ODO
This command is used to set odometer in KM
Usage:
set_odo@<serial>%<password>#<km value>#
Example:
set_odo@180012345%123456#450#
Note: This will set device’s current odometer value to 450KM.
6
SET_PWD
This command is used to change password
Usage:
set_pwd@<serial>%<password>#<new password>#
Example:
set_pwd@12345%123456#654321#
Note: This will change password and store.
7
SET_FACTORY
This command should restore every setting to factory mode and erase everything on
device
Usage:
set_factory@<serial>%<password>#sure#
Example:
set_factory@12345%123456#sure#
Note: It should reset to factory default and restart device.
8
SET_EMRMODE
This command should use to off Emergency mode.
Usage:
set_emrmode@<serial>%<password>#off#
Example:
set_emrmode@12345%123456#off#
9
SET_SERIAL
This command should use to off Emergency mode.
Usage:
set_serial@<serial>%<password>#serial#
