Eminent EM4591, User Manual, Page: 35 / 164

14 |
ENGLISH
11. In the next step you will need to enter the WPA Passphrase of the Wi-Fi network
you wish to connect to (do not change the other settings).
12. Click ‘Apply’ to save and apply the configuration.
13. After the settings have been applied, the EM4591 will reboot and connect to your
wireless router.
Note: The EM4591 now has the same SSID (no longer “Eminent_repeater”) as the
wireless network you connected to in the previous step. To make sure you are
connected to the repeater and not the modem/router keep your device close to the
repeater (approx. 1m). Turn of your WiFi and turn it back on again. The device will
now connect to the SSID closest to the device. You can only access the “User
Interface” of the EM4591 if you are connected directly to the repeater.
14. Check the connection status by entering the User Interface via the browser
(10.0.10.254) and clicking “Device Status”. Here, you can check whether a
connection has been established. Refer to the following image.