18 |
ENGLISH
6.6 Completing the installation of the signal booster
1.
Type ‘http://192.168.8.200’ in the address bar to connect to the signal booster.
2.
Click ‘Setup Tool’.
3.
Click ‘Advanced Setup’ in the left menu.
4.
Click ‘Wireless’ I the left menu.
5.
Click ‘WDS Setup’ in the left menu.
6.
Click ‘Search AP’ in the right screen.
7.
A screen appears. A summary of found wireless networks will be displayed.
8.
Double-click with the left mouse button on the name (SSID) of your wireless
router.
9.
Click ‘OK’.
10. Click ‘Add’ in the right screen.
11. Click ‘Save’ at the top of the right screen.
12. Click ‘OK’ to save the settings.
13. Now remove the network cable between both the wireless router and signal
booster.
14. You have now completed the settings. You can now place the signal booster to
the location where the wireless signal was weak.
Hint: To make sure there is a wireless connection between both devices, you can try
to connect to both devices with the still connected computer. If correct, you can still
access both devices on their web pages. If this does not work, you can repeat the
steps shown in chapter 6.
7.0 Configuring the wireless network on your
computer
Now that the router has been secured you will need to configure the computer itself so
it can recognize your secured wireless network and will be able to make a connection.
Windows XP and Windows Vista are at this moment the most commonly used
operating systems. We will now explain how to set up a wireless connection using
these operating systems.
7.1 Configuring a wireless network using Windows XP
To realize a wireless connection using Windows XP you will need to follow the steps
below:
1.
Turn on your computer.
2.
Click ‘Start’.
3.
Click ‘Control Panel’.
4.
Click ’Network Connections’.
5.
You should now be able to see your wireless adapter. Right click this adapter.