11 |
ENGLISH
1.
Turn on your computer.
2.
Open your webbrowser (e.g. Internet Explorer, Netscape of Firefox).
3.
Type ‘http://192.168.8.1’ in the address bar.
4.
Press the ‘Enter key’ or click ‘Go to’. You will now be asked for a ‘Username’ and
a ‘Password’. Fill in ‘admin’ in the ‘Username’ field and ‘admin’ in the ‘Password’
field and press the enter key.
5.
The login screen is shown.
6.
Click ‘Setup Tool’.
7.
Click ‘Advanced Setup’ in the left menu.
8.
Click ‘Network’ in the left menu.
9.
Click ‘LAN/DHCP Server’.
10. Select ‘Stop’ at ‘DHCP Server’.
11. Click ‘Apply’ at the right side in the menu ‘DHCP Server’.
12. Type ‘192.168.8.200’ in the ‘LAN IP address’ field.
13. Type ‘255.255.255.0’ in the ‘Subnet mask’ field.
14. Click the button ‘Apply & Restart’.
Note! If you wish to log in to your wLINK 300 at a later point in time, you must assign a
fixed IP- address to your computer.
1.
Click ‘Start’.
2.
Click ‘Control Panel’.
3.
Double click ‘Network Connections’.
4.
Right click the appropriate ’LAN Connection’.
5.
Click ‘Properties’.
6.
Select ‘Internet-protocol (TCP/IP)’.
7.
Click ‘Properties’.
8.
Select ‘Use the following IP Address’.
9.
Enter ‘192.168.8.25’ in the ‘IP Address’ field.
10. Enter ‘255.255.255.0’ in the ‘Subnet mask’ field.
11. Click ‘OK’.
12. Enter ‘http://192.168.8.200’ in the address bar to log in to the wLINK 300.
5.3 Securing a wireless network
To avoid having uninvited guests probing your wireless network we strongly
recommend securing your wireless network. There are several security methods
which can secure the network at different levels. To apply a method to your network it
is required that all wireless network devices support this method. The strongest
method of security is WPA (WiFi Protected Access).
This router also support the successor of WPA, called WPA2. Because there are
devices that do not support WPA2, we do not discuss WPA2 in this manual.