23 |
ENGLISH
5.
Enter ‘ipconfig /all’.
6.
Press the enter key.
7.
You will see a ‘physical address’. This is the MAC address of your network
adapter.
Steps for Windows98/ME:
1.
Click ‘Start’.
2.
Go to ‘Run’.
3.
Enter ‘winipcfg’.
4.
Press the enter key or click ‘OK’.
5.
You will see an ‘adapter address’ which is the MAC address of your network
adapter.
Q:
I have configured the router. Everything seems fine but I cannot gain access to
the Internet. My provider is UPC Chello , Ziggo or another DHCP provider.
A: Sometimes the modem does not grant the router access to the Internet. Follow
the instructions below to gain access to the Internet:
1.
Turn off both the router and modem.
2.
Wait for 10 minutes.
3.
Turn on the modem, wait until it has booted completely, then turn on the
router and let it also boot completely.
4.
The connection should now be working properly.
Q:
I tried the solution as explained above, but the internet connection is still not
working. What can I do?
A: Follow the steps below:
1.
Log in to the webpage of the router with ‘http://192.168.8.1’
2.
You will now be asked for a ‘Username’ and a ‘Password’. Fill in ‘admin’ in
the ‘Username’ field and ‘admin’ in the ‘Password’ field and press the ‘Enter’
key.
3.
You are now logged in to the main page of the EM4542.
4.
Disconnect the coax cable from your modem.
5.
Click ‘Status Summary’ under ‘Basic Setup’.
6.
An IP-address of the modem will appear on screen. Often this address is
something like: ‘192.168.100.x’
7.
Reconnect the coax cable to your modem, and wait until the Online/Internet
LED is lit.
8.
Click ‘Status Summary’ once again.
9.
An IP address, given to you by your provider, should now appear on your
screen. If so, you are online.
Q
: How do I set the DHCP server to another IP-address?
A: Use the following method to set the DHCP server to another IP-address: