USER
MANUAL
TEMPERATURE CONTROLLER
STORM
ST
201
08
▶ Press and then until
[Loc]
appears.
▶ Press and
[OFF]
will appear.
This function blocks changes to the controller by displaying the symbol when activated. This lock can
be total or partial, according to parameters
P45
and
P46
.
Shortcut tip:
You can deactivate the lock by turning the controller off and then on again by pressing the
key until
[LOC] [OFF]
is shown in the controller display.
3.4. [LOC] - LOCKING FUNCTIONS
▶ Press and then to
[SP]
▶ Press
▶ With the keys , edit the desired temperature value in the Normal SETPOINT
▶ Press to save
3.6. [SP] - EDIT NORMAL SETPOINT
▶ Press and then to
[SPE]
▶ Press
▶ With the keys , edit the desired temperature value in the Economic SETPOINT
▶ Press to save
3.7. [SPE] - EDIT ECONOMICAL SETPOINT
▶ Press and then until
[CTL]
▶ Press and
[OFF]
will appear.
Activates the control functions shutdown function and starts acting as a temperature display.
Information:
This function depends on the parameters configured in
P44
3.5. [CTL] - TURNS OFF CONTROL FUNCTIONS
▶ Press and then until
[CR9]
is displayed
▶ Press to clear the minimum and maximum temperature registers recorded
3.8. [CR9] - CLEARING MIN AND MAX REGISTERS
