Emico Noah Actuation NA 006, Manual, Page: 31 / 35

9
8JSF$POOFDUJPO
The two cable entries on the NA Series ACTUATOR are basiclly PF 3/4 ˉ . The ACTUATOR is sold world
-wide and so there mat be some differences as to thread pitch standards. Check with your supplier as
to the standard that os supplied in your area.
19-2
Standard conduit and conduit fittings may be used. It is recommended that a seal fitting be fitted
to the actuator conduit entry and sealed with a resin compound after all wiring has been installed.
This will help prevent humidity and water from entering the actuator enclosure.
2-M20
2-PF 3/4 ˉ
2-NPT 3/4 ˉ
Cable Grand Spec.
Sealing
Body Connector
Packing(Sealing) Cover Flexible
19-3
Cable Glands used on explosion proof applications must be certified for the
proper explosion proof application class (Ex d
++
B or d
++
C) and properly sealed.
Failure to use the correct components may result in the failure of the
ACTUATOR enclosure.
EMICO is not responsible the improper installation of these ACTUATORS.
19-1
Any unused conduit entry must remain plugged with the pipe plug supplied in the ACTUATOR.
Do not remove as the unit is already sealed.
19-4
If conduit is used for cable entry, a seal fitting with setting compound must be provided close to
the entry.
※ Example of a General Cable Gland
̷
Cable Entries
̷
31
.PUJPOJODPOUSPMT
ξ