EMI S1C, Installation, Operation And Maintenance Manual

Page: 10 / 28

www.enviromaster.com Side Discharge Condensers
10
INSTALLATION INSTRUCTIONS
9. Refer to Charts on page 12 to “fine
tune” the refrigerant charge to meet
your conditions.
REFRIGERANT PROCESSING
COMPLETE PIPING CONNECTIONS
IMPORTANT NOTES:
1. To find the charge adjustment and system charge for any evaporator and tubing length:
Line Adjustment = (Line Charge/FT) x Line Length
System Total = Factory Line Adjustment
2. Round to the nearest ounce and allow for gauges and hoses.
8. Charge to proper weight, charge
based on feet of interconnect (tables
starting on page 10).
S1C REFRIGERANT CHARGE TABLE
CONDENSER EVAPORATOR PAIRING LINE CHG/FT FACTORY CHARGE
S1CA9 CACA12 .25 oz. 37 oz.
S1CA2 CACA12 .25 oz. 40 oz.
S1CA8 CACA24 .56 oz. 51 oz.
S1CA4 CACA24 .56 oz. 65 oz.
S1CA3 CACA36 .56 oz. 72 oz.
S1CA6 CACA36 .56 oz. 90 oz.
S1CA9 WLHA09 .25 oz. 37 oz.
S1CA2 WLHA12 .25 oz. 40 oz.
S1CA8 WLHA24 .56 oz. 51 oz.
S1CA4 WLHA24 .56 oz. 65 oz.
S1CA3 WLCA30 .56 oz. 72 oz.
S1CA6 WLCA36 .56 oz. 90 oz.
S1H (HEAT PUMP) REFRIGERANT CHARGE TABLE
CONDENSER
EVAPORATOR PAIRING
LINE CHG/FT FACTORY CHARGE
S1HA9 WLHA09 .25 oz. 41 oz.
S1HA2 WLHA12 .25 oz. 44 oz.
S1HA8 WLHA24 .56 oz. 53 oz.
S1HA4 WLHA24 .56 oz. 67 oz.
Note: Charging should be done with a dial-a-charge or weighed in with a scale.
S2C
Shown
S1C
Shown