background image

28

E-mail: [email protected]

Made in Rome, New York, USA

ALL PRODUCT LIMITED WARRANTY

Enviromaster International LLC (EMI) warrants to the purchaser/owner that EMI products will be free from defects in
material and workmanship under the normal use and maintenance for a period of twelve months for all components
and sixty months on unit compressors from the date of original installation, or fifteen months for all components and
sixty-three months on unit compressors from the date of manufacture, whichever comes first.

WHAT WE WILL COVER

EMI will replace any defective part returned to EMI's approved service organization with a new or rebuilt part at no
charge. The replacement part assumes that unused portion of this warranty.

WHAT WE DON'T COVER

THIS WARRANTY DOES NOT INCLUDE LABOR

 or other costs incurred for repairing, removing, installing, shipping,

servicing, or handling of either defective or replacement parts.

EMI IS NOT RESPONSIBLE FOR:

• Normal maintenance

• Damage or repairs required as a consequence of faulty installation or application by other.

• Failure to start due to voltage conditions, blown fuses, open circuit breakers, or other damages due to the
inadequacy or interruption of electrical service.

• Damage or repairs needed as a consequence of any misapplication, abuse, improper servicing, unauthorized
alteration, or  improper operation.

• Damage as a result of floods, winds, fires, lightening, accidents, corrosive atmosphere, or other conditions
beyond the control of EMI.

• Parts not supplied or designated by EMI.

• Products installed outside the United States or Canada.

• Any damages to person or property of whatever kind, direct or indirect, special or consequential, whether resulting
from  use or loss of  use  of the product.

LIMITATION OF WARRANTIES

This warranty is exclusive and in lieu of any implied warranties of merchantability and fitness for a particular
purpose and all other warranties express or implied. The remedies provided for in this warranty are exclusive and
shall constitute the only liabilities on the part of EMI including any statements made by any individual which shall
be of no effect.

FOR SERVICE OR REPAIR:

(1) Contact the Installer
(2) Call the nearest Distributor
(3) Call or write:

5780 Success Dr., Rome, NY 13440
Phone: 1-800-228-9364
FAX: 1-800-232-9364
Email: [email protected]

Summary of Contents for CCP/CHP





























Reviews: