Contents
Introduction ___________________________________________________________________________ 2
Safety Instructions _____________________________________________________________________ 3
EC Declaration of Conformity_____________________________________________________________ 4
Specifications _________________________________________________________________________ 5
Tool Access ____________________________________________________________________________________ 5
Packaged Accessories____________________________________________________________________________ 6
Tool Requirements_______________________________________________________________________________ 6
Operation _____________________________________________________________________________ 7
Preparation for Operation _________________________________________________________________________ 7
Tool Operation __________________________________________________________________________________ 7
AIR FITTING OPERATION ______________________________________________________________________ 7
NOSEPIECE SELECTION ______________________________________________________________________ 7
LOADING RIVET TAPE ________________________________________________________________________ 8
BASIC OPERATION ___________________________________________________________________________ 8
VACUUM ADJUSTMENT _______________________________________________________________________ 8
RELOADING THE TOOL _______________________________________________________________________ 9
REMOVING PARTIALLY USED RIVET TAPE _______________________________________________________ 9
AutoSet
®
5 & 6 Diagram ________________________________________________________________ 10
Parts List ____________________________________________________________________________ 12
Maintenance __________________________________________________________________________ 14
Preventative Maintenance Schedule ________________________________________________________________ 14
Tool Maintenance ______________________________________________________________________________ 14
JAW REMOVAL AND CLEANING _______________________________________________________________ 14
JAW REPLACEMENT_________________________________________________________________________ 15
Tool Lubrication ________________________________________________________________________________ 16
INLINE LUBRICATION ________________________________________________________________________ 16
MANUAL LUBRICATION ______________________________________________________________________ 17
Oil Check _____________________________________________________________________________________ 17
Safety Data ___________________________________________________________________________ 18
Troubleshooting ______________________________________________________________________ 19
Introduction
Thank you for choosing the Emhart Teknologies’ AutoSet
®
Riveting System.
The AutoSet
®
increases productivity by automatically feeding a rivet from a tape held within the magazine
directly to the nose of the tool, freeing one hand to hold and position the work piece.
Models
Rivet Size
Max. Body Length
North America [Europe]
AutoSet
®
5
1/8” (3.2mm) diameter rivets
46 [412]
(
P/N: PA220-990
)
5/32” (4.0mm) diameter rivets
56 [512]
AutoSet
®
6
3/16” (4.8mm) diameter rivets
66 [612]
(
P/N: PA220-991
)
1/8” (3.2mm) Large Flange diameter
rivets
46 [412]
AutoSet
®
tools must be used with genuine POP
®
Brand Rivets on the tape as supplied by Emhart. Tool
performance cannot be guaranteed upon substitution of any other rivets or tape and may void warranty.
This manual contains basic AutoSet
®
tool maintenance instructions. For instructions on how to operate the
tool, please consult the AutoSet
®
“Operator’s Manual”.
Page 2
Emhart Teknologies
- 50 Shelton Technology Center, Shelton CT 06484 - Tel. (203) 924-9341 - Fax (800) 225-5614
