46
TO CHANGE THE DEFINITION OF THE VOLUME BUTTONS AND THE MUTE
BUTTON
In the normal status, the volume buttons and the mute buttons are used for the TV.
However, if you want to use this buttons for another device (e.g. to control the
volume of the STB and not of the TV) you can use this function.
1. Press and hold the SET button for 3 seconds.
2. With the buttons
select „VPT SETUP“ from the menu and
confirm by pressing the OK button. When „TO DEV“ displays, select with the button
directly the device whose volume and the mute button you want to control. When
„FROM DEV“ displays, select the device which this function is switched from (e.g.
TV).
3. The LCD displays „SUCCESS“ and the setting process is finished. To finish the
mode for change of settings, press the button EXIT.
You cannot apply the change of the assignment to devices similar to the PC.
TO CHANGE THE DEFINITION OF THE VOLUME BUTTONS AND THE MUTE
BUTTON INTO THE DEFAULT SETTINGS
If you want to cancel the assignment of the button settings for the volume change
and the mute buttons back to the default assignment (TV), follow these steps.
1. Press and hold the SET button for 3 seconds.
2. With the buttons
select „BASIC VPT“ from the menu and
confirm by pressing the OK button.
3. The LCD displays „SUCCESS“ and the assignment of buttons will be set back to
the original device (TV). To finish the mode for change of settings, press the button
EXIT.
CALCULATOR
1. Press and hold the SET button for 3 seconds.
2. With the buttons
select „CALCULATOR“ from the menu and
confirm by pressing the OK button.
3. With the button
, you enter the sign +.
4. With the button
, you enter the sign -.
5. With the button
you enter the sign ×.
6. With the button
you enter the sign ÷.
7. With the button OK, you do a calculation (sign =).
8. With the button CAL, you clear the calculator.
9. With the button PAUSE, you enter the decimal point.
