44
3. Repeat the step 2 to delete other devices. Then finish the delete mode by
pressing the button EXIT three times.
DELETE ALL LEARNT KEYS IN THE REMOTE CONTROL
1. Press and hold the SET button for 3 seconds.
2. With the buttons
select „LEARNING“ from the menu and
confirm by pressing the OK button. With the buttons
select
„DELETE ALL“ when „SURE DELET“ displays, press the OK button. The LCD
displays „DELETED” and all set commands for all devices are deleted LCD.
3. Then finish the delete mode by pressing the button EXIT twice.
SET UP MACRO
1. Press and hold the SET button for 3 seconds.
2. With the buttons
select „MACRO“ from the menu and confirm
by pressing the OK button. With the buttons
select „MACRO1“ (or
MACRO2-MACRO6) and confirm by pressing the OK button.
3. The LCD displays „SET UP”; confirm it by pressing the OK button*. First, select
the device you start with (if you do not select it, „ERROR KEY“ displays) and
buttons you want macro to process - (if you press TV+POWER
ON+AV+DVD+PLAY+VCR+REC, the TV will be turned on, switched to AV, the
DVD will start to play and a record on VCR will start).
4. After setting all commands (max. 16), press the OK button for saving. The LCD
displays „SUCCESS” and you can leave the menu by pressing EXIT twice.
* If „MACRO HAS“ displays after pressing the OK button, it means that there is
already a set sequence for this macro. In this case use the buttons
and select „DELETE“ from the delete menu. When „SURE
DELET“ displays, press the OK button and when „DELETED“ displays, you go to
the item in the point No.2.
RUN THE SET MACRO
Press the button MACRO and one of the 1-6 buttons (according to the macro you
want to run). The remote control sends series of commands according to the set
sequence. The interval between commands is 0,5 second.
If the number of macro is not selected within 5 seconds or you select empty macro,
the backlight of the display will blink quickly four times.
