EMGA SANTOS 18 Operating And Servicing Manual Download Page 5

98 118 US 3.4 - 12 2010  

5 / 20 

www.santos.fr

IMPORTANT SAFEGUARDS 

When using, cleaning or maintaining the machine, always follow these instructions: 

Read all instructions 

INSTALLATION AND HANDLING

Just one person is required for handling the appliance. For ease of use, it is recommended 
that the machine is placed on a table or work surface so a to have the control panel in 
front of you (recommended height: 90 cm, to be adapted to suit the user).

CAUTION: 

For any handling operation, including unpacking of the machine, do 
not hold or lift the machine by the protective cover (1). 

(fig. A) 

CAUTION:

Check

that the cover (

1

) is in the closed position before plugging the power 

cord (

10

) into the mains socket (fig. C). 

IMPROPER USE

This machine is exclusively meant to be used by qualified personnel in the context of a 
professional job and NOT in the context of private work. 
Any use of the machine which does not observe the instructions in this manual must be 
considered as unsuitable and thus dangerous. 

1.  Do not use this machine for mixing anything other than foodstuffs.   
2.  Do not use this machine for mixing frozen products.  
3.  Do not overload the machine beyond the limits of its bowl capacity, 

i.e. 2.5 kg of flour plus 1.5 kg of water (4 kg of stiff dough). 

4.  Cleaning with a water jet or under pressure is not allowed. 
5.  For electrocution risk protection reasons, never plunge the base 

into water or any other liquid. 

6.  Unplug the appliance before carrying out any work on it: cleaning, 

maintenance or repair. 

!

!

Note: To facilitate understanding of the following paragraph, consult the diagrams 
located at the end of the manual.  

These photographs and images are given as an example and are non-contractual. Santos 

reserves the right to change them at any moment.

 

!

7.  The use of spare parts other than certified SANTOS original parts is 

prohibited.

 

408015 en ma 2010.12 

5/20

Summary of Contents for SANTOS 18





















Reviews: