TS1 Series
Temperature Controls
Alco Controls
D
A
T
A
S
H
E
E
T
TS1__35038_EN_R05.doc
4 / 8
10.08.2011
Nomenclature
The following chart explains the nomenclature of the TS1
controls for ease of reference. The basic structure is that of a
three digit
Product Name
followed by a three digit code,
describing
Function, Temperature Range
and
Temperature
Sensor.
Customised versions, which deviate from standard catalogue
products are available on request and use a different
Product
Name.
They are called
TSA
followed by the three digit code to
indicate
function, temperature range
and
temperature sensor
.
Technical data
Environmental conditions
Electrical contacts
Ambient temperatures
Type of contacts
1 x SPDT contact
storage and transportation:
operation:
-50 °C to +70 °C
-50 °C to +70 °C
Contact material
- standard:
- options:
CuAg
3
gold plated contacts
Maximum temperature at sensor bulb depending on bulb
Heating load (AC1):
24A / 230 V AC
Locked rotor / Startup (AC3):
144A / 230 V AC
type and charge
Inductive load (AC15):
10A / 230 V AC
Dust and water protection
EN 60529 / IEC 529:
Control mounted flush against wall!
IP44 (w/o off-switch)
IP30 (with off-switch)
Inductive load (DC13):
0.1A / 230 V DC
3A / 24 V DC
6A / 12 V DC
Vibration resistance:
4 g @ 10 … 1000 Hz
Motor rating UL (FLA):
24A / 120/240V AC
Approvals
Locked rotor UL (LRA):
144A / 120/240V AC
Low Voltage Directive
all models
Bellows heater (sensor types A, E, P -
73/23/EWG 93/68/EWG;
EN 60947-1 / 60947-5-1 / 60730-2-9
(CE-Label)
not for frost monitors function C or D):
- option:
82 k , 230V AC, DC
12V, 24V rating
Germanic Lloyd:
standard models
Materials
when used with marine cable glands (accessory)
Housing materials
cover: Polycarbonate (PC)
UL / CSA:
all models
(pending)
frame: Steel, yellow chromated
Type code
TS1 -
Function / housing variant
A
= Wall mounting, top adjustment
B
= Wall mouting, top adjustment, off-switch
C
= Frost monitor, auto reset
D
= Frost monitor, manual reset
E
= Wall mounting, front adjustment
F =
Wall mounting, front adjustment, off-switch
G
= Flush mounting
H
= Flush mounting, off-switch
R = Wall mounting, top adjustment, manual reset*
*
temp. ranges 0 – 4: manual reset for falling temperature
temp. ranges 5 – 9: manual reset for rising temperature
Temperature Sensor Type
A
= Vapour charge, 2 m, bulb
E
= Vapour charge, 0 m, coil
F
= Adsorption charge, 2 m, bulb
P
= Vapour charge, 2 m, capillary
function „C“ and „D“: 6 m capillary
Temperature range
0
=
+4.5 … + 20 °C
1
=
-45 … -10 °C
2
=
-30 … +15 °C (-30 … +10 °C)
3
=
-10 … +35 °C (-10 … +25 °C)
4
=
-25 … +30 °C (-30 … +35 °C)
5
=
+20 … +60 °C (+25 … +75 °C)
6
=
+50 … +100 °C
7
=
0 … +10 °C
() =
dep. on exact version
Product Name
TS1
= Adjustable thermostat
TSA
= Customised version
