Emerson Sylvania EWF2004 Owner'S Manual Download

Page: 3 / 8

[-]

GAME MODE

[+]

OFF

[-]

BRIGHT

[+]

[-]

CONTRAST

[+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]

SHARPNESS

[+]

PREPARATION FOR USE

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel)

▲

▼

button.

3) Adjust the volume to the desired listening level using the VOL(ume)

▲

▼

button.

4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the power automatically turn off
after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the

remote control repeatedly. The timer can be set up to 90
minutes, 10 minutes each time the SLEEP button is
pressed. (The timer display counts up each time on the
screen as you press the SLEEP button on the remote con-
trol.)

Note:

When you disconnect the unit from the AC outlet, or when you have a power failure, the

sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C1]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ C2]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T1]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [ T2]
TV SOUND [MAIN]

GAME MODE

Set to the most suitable position for video
games.

[+] : ON

[ - ] : OFF

BRIGHT

Adjust until the darkest parts of the picture are
as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+] : increase contrast [ - ] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+] : be brilliant color [ - ] : be pale color

TINT

Adjust to obtain natural skin tones.

[+] : greenish tone [ - ] : reddish tone

SHARPNESS

Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

●

“+” is achieved by pressing the VOL(ume)

▲

button and “-” by pressing the

VOL(ume)

▼

button.

●

In the above steps, the picture adjustment
display will disappear from the TV screen
automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume)

▲

button so that "PIC-

TURE" is selected. Then, press the
CH(annel)

▲

▼

button repeatedly until

the display returns to the screen.

●

If you adjust another picture control after
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. “GAME”
appears on the TV screen.

●

To exit the Game mode and external input
mode, press the GAME button on the remote
control again.

●

To cancel the Game mode only, adjust the
picture control. The GAME mode will be set
to [OFF] automatically as explained in the
previous section. In this case, “VIDEO”
(external input mode) instead of “GAME”
appears on the TV screen.

●

If you press the GAME button when the TV
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume)

▲

button so that "PICTURE" is selected.

3) Select the feature you wish to adjust with the CH(annel)

▲

▼

button and adjust it with the

VOL(ume)

▲

▼

button.

: Press the CH(annel)

▲

▼

button.

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.

Note:

If some digits appear in the corner of the screen, press the POWER

button without unplugging the power cord.

2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel)

▲

▼

button to point to "[ENG]".

5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using

the VOL(ume)

▲

▼

button.

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel)

▲

▼

button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲

button.

4) Press the CH(annel)

▲

▼

button to point to "AUTO PRESET CH".

Then, press the VOL(ume)

▲

button.

The tuner scans and memorizes all active channels in your area.

●

The TV distinguishes between standard TV channels and cable (CATV)
channels.

●

When AUTO PRESET CH action is completed, the lowest memorized
channel reappears on the screen.

●

When you press the CH(annel)

▲

▼

button after selecting "AUTO PRESET CH",

the tuner will stop at the memorized channels only.

●

The TV may recognize TV channels to be CATV channels by receiving conditions. In this case,
try AUTO PRESET CH action again in the fine receiving conditions.

●

When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS"
will appear on the display after the completion of channel scanning.

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel)

▲

▼

button to point to "CHANNEL SET".

Then, press the VOL(ume)

▲

button.

3) Press the VOL(ume)

▲

button so that "ADD/DELETE" is selected.

4) Use the CH(annel)

▲

▼

button to select the channel you wish to put

into memory or to erase from memory.

Note:

The display will disappear automatically in about 10 seconds.

Perform "ADD/DELETE" function while this display appears on the
screen.

●

Press the VOL(ume)

▲

▼

button to light up the channel number

in LIGHT BLUE if you wish to add the channel into memory.

●

Press the VOL(ume)

▲

▼

button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) System

You can listen to a program in MTS stereo by following the steps below.

[To Select STEREO, MONO or SAP in Stereo broadcast]

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel)

▲

▼

button to point to "TV SOUND".

3) Press the VOL(ume)

▲

▼

button to select your desired stereo mode. ([MAIN], [MONO] or

[SAP].)

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

ADD/DELETE
AUTO PRESET CH

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

OPERATIONS

Type of

broadcast

Regular

-None-

Stereo

broadcast

STEREO

SAP

Menu

Selection

MAIN

MONO

SAP

-None-

MONO

STEREO

SAP

MAIN

To show the status, press the DISPLAY
button on the remote control.

SAP:

Second Audio Program, which

means your program can also be
received in a second language or
sometimes a radio station.

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MONO]

PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]

: Press the VOL(ume)

▲

▼

button.

To cancel the sleep timer:

Press the SLEEP button repeatedly
until "SLEEP 0" is displayed.

You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel)

▲

▼

button to point

to "CAPTION".

3) Press the VOL(ume)

▲

▼

button to

select the mode you wish.