Emerson SUMMERHAVEN LED CF850GES01 Owner'S Manual Download Page 11

Page: 11 / 24

emersonfans.com

Please contact 1-800-654-3545 for further assistance

U.L. Model No.: CF850

If you feel that you do not have enough electrical

wiring knowledge or experience, have your fan

installed by a licensed electrician.

5.1

Connect the Green Grounding Lead from the

Hanger Ball and the Green Grounding Lead

from the Hanger Bracket to the Grounding

Conductor of Supply (this may be a bare wire

or wire with green colored insulation) . Securely

connect Wires with Wire Connectors (supplied)

(Figure 14) .

LISTED WIRE

CONNECTOR

SUPPLY WHITE

(NEUTRAL)

FAN MOTOR

WHITE WIRE

Figure 15

5.2

NOTE: If you are using an Emerson Light Fixture

with your Fan, see Light Fixture Owner’s Manual for

wiring.
Securely connect the Fan Motor White Wire to the

Supply White (neutral Wire using Wire Connector

(supplied) (Figure 15) .

5. How to Wire Your Ceiling Fan

To avoid possible electrical shock, be sure electricity

is turned off at the main fuse box before wiring.

NOTE: If you are not sure if the outlet box is grounded,

contact a licensed electrician for advice, as it must be

grounded for safe operation.

WARNING

This product is designed to use only those parts

supplied with this product and/or any accessories

designated specifically for use with this product

by Emerson Electric Co. Substitution of parts or

accessories not designated for use with this product

by Emerson Electric Co. could result in personal injury

or property damage.

WARNING

GROUND

CONDUCTOR SUPPLY

LISTED WIRE

CONNECTOR

GREEN WIRE

(GROUND) FROM

HANGER BRACKET

GREEN WIRE

(GROUND) FROM

HANGER BALL

Figure 14

Summary of Contents for SUMMERHAVEN LED CF850GES01

























Search results

Summary of Contents for SUMMERHAVEN LED CF850GES01

Reviews:

Related manuals for SUMMERHAVEN LED CF850GES01

Brands by name

Popular brands

Emerson SUMMERHAVEN LED CF850GES01, Owner'S Manual

Search results

Summary of Contents for SUMMERHAVEN LED CF850GES01

Reviews:

Related manuals for SUMMERHAVEN LED CF850GES01

Brands by name

Popular brands