1 3
6.) Press the
PLAY/PAUSE
button. Playback begins on
track “01” and the Play indicator appears in the display.
Adjust the
VOLUME
and
BASS BOOST
controls as desired.
7.) Playback will continue until the last track has played then the disc stops, the
Play indicator disappears, and the display again shows the total number of
tracks on the disc.
To stop playback before the disc ends press the
STOP
button at any time.
The disc stops and the display again shows the total tracks on the disc.
8.) If you are finished listening remove your disc from the player and close the CD
door.
9.) Slide the
POWER OFF/CD/RADIO
selector switch back to the
POWER OFF
position. The
POWER
indicator goes off.
Pause Control
To pause momentarily during CD playback press the
PLAY/PAUSE
button
again.
The sound stops and the track number display flashes but the
disc continues to spin.
Press the
PLAY/PAUSE
button again to cancel the Pause mode and resume
normal playback. The sound resumes at the same point on the disc and the track
number display stops flashing.
SB250A_011205.p65
12/1/2005, 17:25
13
