10
RXI Basic Quick Start Guide
GFK-3233A
8.
The following steps need to be performed to enable the Auto logon
process for the current user:
a)
Select Enable option to login into RXi HMI without credentials
on every reboot.
b)
Enter Username, Password and Domain (if available) and click
Apply button. If the entered credentials are valid, then Auto
Logon will be enabled for the specific user. The user will be
prompted to either Reboot Now or defer to later as shown in .
c)
If the entered credentials are not valid , appropriate failure
message will be shown to the user.
Tip
The Auto Logon feature can be enabled or disabled after subsequent
startups by launching the RXi HMI OI Utilities from the desktop icon and
navigating to the Auto Logon page after application startup.
Figure 9: RXi HMI Reboot Prompt Message
