Emerson RTM-ATCA-F140, Installation And Use Manual

Page: 21 / 72

Chapter 2
RTM-ATCA-F140 Installation and Use (6806800M97A)
21
Hardware Preparation and Installation
2.1 Overview

Inspect the shipment and unpack the RTM.

Make sure environmental and power requirements are met.

Install the RTM.
2.2 Unpacking and Inspecting the RTM
The shelf should provide minimum airflow to the RTM slot according to the class B.4
requirements of the CP-TA Inter-operability document AdvancedTCA Book 1.1. This includes
the following:

2.0 cfm at 25 °C ambient temperature

2.8 cfm at 40 °C ambient temperature

4.4 cfm at 55 °C ambient temperature
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:

Printed Quick Start Guide and Safety Notes Summary

RTM-ATCA-F140
Damage of Circuits

Electrostatic discharge and incorrect installation and removal of the blade can damage
circuits or shorten its life.

Before touching the blade or electronic components, make sure that you are working in
an ESD-safe environment.
EA Version