Emerson RTM-ATCA-F125, Installation And Use Instruction

Page: 16 / 62

Introduction
RTM-ATCA-F125 Installation and Use (6806800K30C )
16
EN 55024 (EU) The product complies with EN55024 (EU) Information
Technology Equipment - Immunity Characteristics - Limits and
Methods of Measurements.
EN 60950-1 This product complies with EN 60950-1 Safety of Information
Technology Equipment.
EN55022 Class A (EU) The product complies with EN55022 Class A (EU), Information
Technology Equipment - Radio Disturbance Characteristics -
Limits and Methods of Measurements.
ETSI Acoustic Noise ETS 300 753
Class 3.1
The product will not prevent the system from
complying
with the ETSI acoustic noise requirements per Class 3.1 of ETSI
ETS 300 753, Equipment Engineering (EE); Acoustic noise
emitted by
telecommunications equipment.
ETSI Stationary Use: EN 300 019-
2-3 Class 3.1 The product is designed to comply with ETSI Stationary Use: EN
300 019-2-3, Class 3.1 equipment (temperature controlled
locations).
ETSI Storage EN 300 019-2-1
Class 1.2 The product is designed to comply with ETSI Storage: EN 300
019-2-1, Class 1.2 equipment (not temperature controlled
storage locations).
ETSI Transportation: EN 300 019-
2-2 Class 2.3 The product is designed to comply with ETSI Transportation: EN
300 019-2-2, Class 2.3 equipment (public transportation).
FCC 47 CFR Part 15 Subpart B
(US), Class A The product complies with FCC 47 CFR Part 15 Subpart B (US),
Class A.
GR-1089 - Ports and Intra-
building Lightning All externally accessible ports shall be designed to comply with
the applicable GR-1089 requirements for Telecommunication
Ports.
GR-1089-CORE Products are designed to comply with all applicable
requirements for Type 2 Equipment referenced in Telcordia
Document GR-1089-CORE.
GR63-CORE The product is designed to comply with all applicable
requirements of Telcordia GR-63-CORE, NEBS Requirements:
Physical Protection.
IEC 60950-1 CB Scheme The product complies with IEC 60950-1 CB Scheme including all
National Deviations Safety of Information Technology
Equipment. Testing shall be by an accredited lab.
Table 1-1 Standard Compliances (continued)
Standard Description