Emerson Rosemount Volume 1, Quick Start Manual, Page: 24 / 32

2. The non-metallic label may store an electrostatic charge and become
a source of ignition in Group III environments
3. Guard the LCD display cover against impact energies greater than 4
joules.
4. Flameproof joints are not intended for repair
5. A suitable certified Ex db or Ex tb enclosure is required to be
connected to temperature probes with Enclosure option "N".
6. Care shall be taken by the end user to ensure that the external
surface temperature on the equipment and the neck of DIN Style
Sensor probe does not exceed 130 °C.
7. Non-Standard Paint options may cause risk from electrostatic
discharge. Avoid installations that cause electrostatic build-up on
painted surfaces, and only clean the painted surfaces with a damp
cloth. If paint is ordered through a special option code, contact the
manufacturer for more information.
10.8 Brazil
E2 INMETRO Flameproof
Certificate UL-BR 13.0535X
Standards ABNT NBR IEC 60079-0:2013; ABNT NBR IEC 60079-1:2016;
ABNT NBR IEC 60079-31:2014
Markings Ex db IIC T6…T1 Gb T6…T1(-50 °C ≤ T
a
≤ +40 °C), T5…T1(-50
°C ≤ T
a
≤ +60 °C)
Ex tb IIIC T130 °C Db (-40 °C ≤ T
a
≤ +70 °C)
Special Conditions for Safe Use (X):
1. See certificate for ambient temperature range.
2. The non-metallic label may store an electrostatic charge and become
a source of ignition in Group III environments.
3. Guard the LCD display cover against impact energies greater than 4
joules.
4. A suitable certified Ex d or Ex tb enclosure is required to be connected
to temperature probes with Enclosure option "N".
5. Care shall be taken by the end user to ensure that the external
surface temperature on the equipment and the neck of DIN Style
Sensor probe does not exceed 130 °C.
6. Consult the manufacturer if dimensional information on the
flameproof joints is necessary.
Quick Start Guide March 2021
24 Emerson.com/Rosemount