Instruction Manual Rev B
21
Section 3 Control Unit (RCU) Operation Page Description
RCU unit buttons
About page
When power is first applied press ESC to display the Main page.
The left, right, up, down arrows are used to move display arrows or move
to other pages.
The ESC button is used to move back from the page you are on to the
previous page.
The enter or return button is used when entering variable. Press it
and the variable will change from steady to blinking, enter the new value
and follow screen tip at the bottom to complete the operation.
The info button is used for setting the PLC functions. This is not used
during normal operation. When required the use of the functions will be
explained in this manual.
The key pad is used to enter values.
The +/- is used when (–) sign for values are required.
These buttons are not used on this model.
Summary of Contents for Rosemount OPM3000
