Emerson Rosemount ET310C, Quick Start Manual, Page: 10 / 28

For installation on pipes with a diameter less than 4 inches (e.g. NPS
2 or NPS 3 pipes) then shoe C should be selected.
3.2 Mounting the sensor
Procedure
1. Remove the strap from the packaging.
2. Remove the protective cap from the sensor.
CAUTION
Once the protective cap is removed, the strong magnetic field at the
end of the sensor can suddenly attract other objects, such as tools.
Figure 3-1: Sensor with Protective Cap
Quick Start Guide September 2022
10 Emerson.com/Rosemount