Quick Installation Guide
00825-0200-4708, Rev AD
April 2012
Rosemount 708
8
S
TEP
3: V
ERIFY
O
PERATION
There are three ways to verify operation: using the Field Communicator, using the Smart
Wireless Gateway’s integrated web interface, or by using AMS
®
Suite Wireless Configurator
or AMS Device Manager.
If the Rosemount 708 was configured with the Network ID and Join Key, and sufficient time
has passed, the transmitter will be connected to the network. If Network ID and Join Key
were not configured, please reference Troubleshooting on page 9.
NOTE
It may take several minutes for the device to join the network.
Field Communicator
For HART Wireless transmitter communication, a 708 DD is required. To obtain the latest
DD, visit the Emerson Process Management Easy Upgrade site at:
http://www2.emersonprocess.com/en-US/documentation/deviceinstallkits
. The
communication status may be verified in the wireless device using the following Fast Key
sequence.
Smart Wireless Gateway
Using the Smart Wireless Gateway’s integrated web interface, navigate to the Explorer
page as shown in Figure 8. Locate the device in question and verify all status indicators are
good (green).
Figure 8. Smart Wireless Gateway Explorer page
Function
Key Sequence
Menu Items
Communications
3, 4
Join Status, Wireless Mode, Join Mode,
Number of Available Neighbors, Number of
Advertisements Heard, Number of Join
Attempts