Quick Installation Guide
00825-0200-4708, Rev AD
April 2012
Rosemount 708
7
S
TEP
2: D
EVICE
N
ETWORK
C
ONFIGURATION
In order to communicate with the Smart Wireless Gateway, and ultimately the Information
System, the transmitter must be configured to communicate with the wireless network. This
step is the wireless equivalent of connecting wires from a transmitter to the host system.
Using a Field Communicator or AMS, enter the
Network ID and Join Key
so that they
match the Network ID and Join Key of the gateway and other devices in the network. If the
network ID and join key are not the same as the Gateway, the acoustic transmitter will not
communicate with the network. The Network ID and Join Key may be obtained from the
Smart Wireless Gateway on the
Setup>Network>Settings
page on the web server, shown
in Figure 7.
Figure 7. Gateway Network Settings
AMS
Right click on the acoustic transmitter and select
Configure
. When the menu opens, select
Join Device to Network
and follow the method to enter the Network ID and Join Key.
Field Communicator
The Network ID and Join Key may be changed in the wireless device by using the following
Fast Key sequence. Set both Network ID and Join Key.
Function
Key Sequence
Menu Items
Join Device to
Network
2, 1, 2
Network ID, Set Join Key