22
Reference Manual
00809-0200-4705, Rev AB
May 2017
4.2
Configuring the transmitter to communicate with the
wireless network
In order to communicate with the Smart Wireless Gateway, and ultimately the Host System, the
transmitter must be configured to communicate with the wireless network. This step is the wireless
equivalent of connecting wires from a transmitter to the Host System. Using a Field Communicator or
AMS
™
Device Manager, enter the Network ID and Join Key so they match the Network ID and Join Key of
the gateway and other devices in the network. If the Network ID and Join Key are not identical, the
Rosemount 705 Transmitter will not communicate with the network. The Network ID and Join Key may
be obtained from the Smart Wireless Gateway on the
Setup>Network>Settings
page on the web server,
shown in
Figure 4-1. Gateway Network Settings
Summary of Contents for Rosemount 705
