20 – English – rM200
Individual Components
Handles and Docks
Carry Handle
The carry handle comes installed on the
rM200 case.
CS6x Versa Hanger
The CS6x Versa hanger lets you mount
the SeeSnake CS6x Versa Wi-Fi enabled
reporting monitor onto the rM200 for easy
transport. See page 24 for instructions on
docking the CS6x Versa hanger.
Pull Handle
The pull handle on the rM200 can be locked
in four positions. Each position has a differ-
ent purpose which increases usability and
maneuverability.
• Midway for use as a kick stand.
• Upright to maneuver during transport.
• Against the rear case when in use.
• Against the front case for storage in
small spaces and transport when
going up or down ladders.
To position the pull handle, follow these
steps:
1. Set the rM200 case on its feet.
2. Press the handle lock and position the
handle.
3. Release the handle lock to lock the
handle into place.
