rM200 – English – 25
Maintenance and
Support
Cleaning
Clean your system with rags and a soft
nylon brush. If desired, a mild detergent or
disinfectant can be used. Do not use sol-
vents or high pressure water to clean any
part of the system.
Maintaining Components
Camera Head
Scratches on the camera have a minimal ef-
fect on its performance. Do not use scraping
tools or sand the camera to remove scratch-
es.
Push Cable
Run a rag over the push cable and visually
inspect it for cuts and abrasions while push-
ing it back into the drum. Replace or repair
the push cable if the outer jacket is cut or
abraded.
Storage
The rM200 must be stored in a dry, secure
area between -40°C and 65°C [-40°F and
149°F]. Store your equipment in a locked
area out of the reach of children and people
unfamiliar with its purpose.
Support
For support and additional information
about using your system, visit
Service and Repair
Improper service or repair can cause the
camera reel to be unsafe to operate.
Service and repair of the camera reel must
be performed at a RIDGID Independent Au-
thorized Service Center. To find your near-
est service center or for any service or re-
pair questions:
• Contact your local RIDGID distributor.
• Contact Ridge Tool Company
Technical Service Department at
[email protected] or, in
the USA and Canada, call 1-800-519-
3456.
