6 TO 9
INCHES
MOTOR
COUPLING
MOTOR
COUPLER
4.5
The Fan comes with Blue, Black and White Wires that
are 42” or 80" Long, depending on the Model.
Measure up Approximately 6 to 9-inches above the
Motor Coupler (Figure 10).
Cut off Excess Wires and Strip back Insulation 1/2-inch
from ends of Wires.
Figure 10
4. Installing the Ceiling Cover on the Fan Motor
Housing
(For Close-to-the-Ceiling Mounting) (Continued)
DECORATIVE CAP
CEILING COVER
4.3
Gently pry the Decorative Cap from the Ceiling Cover
(Figure 8).
RUBBER GASKET
SCREWS (3)
(Previously Removed)
CEILING COVER
4.4
Align the Holes in the Ceiling Cover with the Holes in
the Motor Housing and Secure using the Three Screws
previously removed in Step 4.1 (Figure 9).
Figure 9
Figure 8
NOTE: For hanging instructions using Close-to-the-
Ceiling Method, See Page 12, Section 7. Hanging
the Ceiling Fan (Close-to-the-Ceiling Method with
Ceiling Cover Installed on the Motor Housing).
9
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 42-ANT & 52-ANT
