Emerson PACSystems Versamax, User Manual

Page: 34 / 53

User Manual Chapter 3
GFK-2721B Sep 2019
Configuration 30
Table 8
Basic On-Off Time Module Types
0.5ms IC200MDL631 / 632 / 635 / 636 / 640 / 650, IC200MDD840 / 842 / 843 /
844 / 845
0.25ms IC200MDL643 / 644, IC200MDD851
Outputs Default / Hold Last State: When the module has outputs, this field specifies how the
PROFINET Scanner will handle the module’s output data if it loses communication with the
IO- Controller. Select either Hold Last State or Default Value. This setting applies to all the
module’s outputs. If Default Value is chosen, d efault values can be set up on a per-point
basis.
Note: VersaMax analog modules latch their last outputs when configured for Hold Last State and
hold that value if field power remains on the module.
In contrast, discrete modules transition to module defaults of zero, even if Hold Last
State is configured, when they lose connection to the PROFINET Scanner.
Default Output Values: If the module has discrete outputs, a default value of 0 or 1 can be
selected for each output. Outputs without a configured default value will default to 0.
All VersaMax Analog modules except MDD841 and ALG331 support only a default Analog
value of zero.
Note: Unlike other VersaMax Scanners, the PROFINET Scanner does not contain input default
actions and default values. In PROFINET, these settings are part of the IO-Controller
configuration.
3.2.6 Configuring Analog Modules that Have Jumpers
The following VersaMax analog modules, which use jumpers to select their voltage / current
operation or output defaults, require an additional configuration step after adding the
module to the PROFINET Scanner configuration before their parameters can be configured:
Table 9
IC200ALG230 Analog Input Module, 12 Bit Voltage/Current 4 Channels
IC200ALG260 Analog Input Module, 12 Bit Voltage/Current 8 Channels
IC200ALG262 Analog Input Module, 15 Bit Current Differential 8 Channels
IC200ALG264 Analog Input Module, 15 Bit Current 15 Channels
IC200ALG266 Analog Input 15 Bit Current 15Ch with enhanced over voltage protection
IC200ALG320 Analog Output Module, 12 Bit Current, 4 Channels
IC200ALG321 Analog Output Module, 12 Bit Voltage 4 Channels. 0 to +10VDC Range
IC200ALG322 Analog Output Module, 12 Bit Voltage 4 Channels. -10 to +10VDC Range
IC200ALG325 Analog Output Module, 13 Bit Voltage 8 Channels
IC200ALG326 Analog Output Module, 13 Bit Current 8 Channels
IC200ALG327 Analog Output Module, 13 Bit Voltage 12 Channels
IC200ALG328 Analog Output Module, 13 Bit Current 12 Channels
IC200ALG430 Analog Mixed Module, Input Current 4 Channels, Output Current 2 Channels
IC200ALG431
Analog Mixed Module, 0 to +10VDC Input 4 Channels, Output 0 to +10VDC 2
Channels
IC200ALG432 Analog Mixed Module, 12 Bit -10 to +10VDC, Input 4 Channels / Output -10 to
+10VDC 2
Channels