PACMotion™ Rotary Servo Motors Installation and User Manual
Section 1
GFK-3169B
October 2020
Introduction
9
Handling
Transport
•
Climate category 2K3 according to IEC 60721-3-2, EN61800-2
•
Temperature: -25 - +70 °C, max. 20 K/HR change
•
Humidity: rel. humidity 5% - 95% , no condensation
•
Only by qualified personnel in the
manufacturer’s
original recyclable packaging
•
Avoid shocks, especially to the shaft end
•
If the packaging is damaged, check the motor for visible damage. Inform the carrier and, if
appropriate, the manufacturer.
Packaging
•
Cardboard packing with Instapak® foam cushion.
Motor
type
Packing
Max. stacking
height
IC830M2
Cardboard
10
IC830M4
Cardboard
6
IC830M6
Cardboard
1
IC830M7
Cardboard
1
Storage
•
Climate category 1K4 according to IEC 60721-3-1, EN61800-2
•
Storage temperature: - 25 - +55°C, max. variation 20K/hr.
•
Humidity: rel. humidity 5% - 95%, no condensation
•
Store only in the
manufacturer’s
original recyclable packaging
•
Max. stacking height: see table in chapter "Packaging"
•
Storage time: unlimited
•
Maintenance / Cleaning
•
Maintenance and cleaning only by qualified personnel
•
The ball bearings should be replaced after 20,000 hours of operation under rated conditions (by
the manufacturer).
•
Check the motor for bearing noise every 2500 operating hours, respectively each year. If any
noises are heard, stop the operation of the motor, the bearings must be replaced (by the
manufacturer).
•
Opening the motor invalidates the warranty.
•
If the housing is dirty, clean housing with Isopropanol or similar, do not immerse or spray.